1
/
of
5
BATES® HTR-1
BATES® HTR-1
Shipping calculated at checkout.
BATES® HTR-1 provides temporary, effective protection from unwanted build-up of highly active compounds such as adhesives, resins, and fiberglass. It forms a thin protective coating that allows for easy scraping and removal in accumulation areas. BATES HTR-1 can be used to repel glue in hot gluing applications up to 300°F/148.9°C.
Request for Quote
BATES® HTR-1
Thank you for your message. We will get back to you soon!
GREAT FOR USE ON
GREAT FOR USE ON
- Applicator wheels & rolls
- Clamps & clamp carriers
- Hot gluing equipment
- Glue pans
- Heat press platens
- Joiners
- Planer tables
- Radio frequency glue systems
- Saw tables
- Set-up tables
- Slat conveyors
- Spreaders
FEATURES
FEATURES
- Temporary barrier coating prevents hot glues, adhesives and resins from adhering to machinery
- Dries to a very thin, soft film
- Allows for dried glue mess to be easily scraped off
- Reduces machinery down-time for cleaning
- Regular application prevents need for harsh cleaning methods
- Silicone-free
- Non-toxic
- Non-hazardous
- No solvents
DATA SHEETS
DATA SHEETS
Collapsible content
APPLICATIONS
Surface Preparation
- Surfaces must be clean and free of contamination. BATES® HTR-1 is not a glue remover and will only work when applied to clean equipment.
- Before initial application, clean equipment to remove any oily residue that would prevent HTR-1 from adhering to the surface.
- Any glue equipment surface, or equipment exposed to glue drippings, can be protected by HTR-1.
Application
- High Frequency Gluers and Hot Presses
- Vacuum/Membrane Presses
Removal and Reapplication
- Accumulated compounds can be easily scraped off equipment using a straight-edged scraping tool.
- In high volume operations, HTR-1 should be reapplied once per day or at the end of each shift.
- In low volume operations, HTR-1 should be reapplied once per week.
- Cleaning solvents are not needed for the removal of accumulated glue if proper application and removal procedures are followed.
Cleanup & Storage
- Application equipment can be cleaned using hot soapy water.
- Securely cover container of HTR-1 to prevent evaporation and deterioration. Stirring may be necessary after long periods of storage.
- Store HTR-1 in a climate controlled area to prevent freezing. It should be stored at temperatures between 50°F/10°C and 90°F/32°C. If HTR-1 freezes, store at room temperature until thawed and stir contents thoroughly before using. DO NOT heat the container of BATES.
PRODUCT DETAILS
BATES HTR-1 cures to a slippery film. DO NOT use on floors or walkways.
