ANCHORSEAL® Classic

$29.25

Sale Sold out

Shipping calculated at checkout.

ANCHORSEAL Classic is a best-in-class premium wax emulsion end grain sealer used for the prevention of end checks (drying splits) in both hardwood & softwood logs or lumber. By controlling the rate of moisture loss, up to 90% of end checks can be prevented when applying this end grain sealer. It was the first end grain sealer introduced to the log & lumber industry by U-C Coatings in 1980 and is still considered the best end grain protection you can get for logs & lumber. This end grain sealer is also widely used in the woodworking industry to protect debarked logs, wood turning blanks, log "cookies," and live edge slabs.

Size 1 Quart 1 Gallon 5 Gallon

Color Clear Red Blue Forest Green

Product variants

Quantity

GREAT FOR USE ON

Hardwood logs and lumber
Softwood timbers and lumber
Debarked logs
Log exports
Woodturning blanks
Log "cookies"

FEATURES

Prevents up to 90% of drying splits
Reduces blue stain and sapstain in logs
Improves yield with less waste
Water based
Non-hazardous
No solvents
Soap and water cleanup

View full details

APPLICATIONS

Surface Preparation

All areas to be coated should be clear of dirt and debris

Application

Apply ANCHORSEAL using a brush, roller or sprayer until it begins to drip slightly
For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period

Cleanup & Storage

Clean application equipment using hot soapy water
Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage

RESOURCES

Technical Data Sheet

Safety Data Sheet

Item added to your cart

ANCHORSEAL® Classic