ANCHORSEAL® 2 Premium
ANCHORSEAL® 2 Premium
ANCHORSEAL® 2 ipe end grain sealer is a hybrid wax emulsion sealer designed to prevent up to 90% of end checking (drying splits) in freshly sawn logs, lumber, ipe decking, turning blanks, and other green wood components.
- Non-toxic, water-based ipe end grain sealer
- Freeze stable formula
- Use on the end cuts of hardwood, softwood, and ipe wood
- Prevents up to 90% of end checking
- Uses natural plant-based polymers and wax to protect against drying splits
Couldn't load pickup availability
GREAT FOR USE ON
GREAT FOR USE ON
GREAT FOR USE ON
- Hardwood logs and lumber
- Softwood timbers and lumber
- Debarked logs
- Log exports
- Woodturning blanks
- Log "cookies"








Collapsible content
APPLICATIONS
Surface Preparation
- All areas to be coated should be clear of dirt and debris
Application
- Apply ANCHORSEAL using a brush, roller or sprayer until it begins to drip slightly
- For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
- If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
- Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
Cleanup & Storage
- Clean application equipment using hot soapy water
- Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage
The Anchorseal arrived quickly and was easy to apply by roller. Seems to be working fine.
Great stuff
I have used it before and it works great
Having never sealed end grain before to really give a knowledge review it may take 1 to 4 years for the cherry,walnut and hackberry turning blanks that I used Anchorseal on to season then I will know if it stopped end grain checking
I liked it better than the sealer I purchased from Bailey's. Leaves an adequate barrier with just one coat and sets up in a reasonable time. Delivery was prompt as well.