1 11

ANCHORSEAL® Classic

ANCHORSEAL® Classic

$29.25
$29.25
Sale Sold out
Shipping calculated at checkout.

ANCHORSEAL Classic is a best-in-class premium wax emulsion end grain sealer used for the prevention of end checks (drying splits) in both hardwood & softwood logs or lumber. By controlling the rate of moisture loss, up to 90% of end checks can be prevented when applying this end grain sealer. It was the first end grain sealer introduced to the log & lumber industry by U-C Coatings in 1980 and is still considered the best end grain protection you can get for logs & lumber. This end grain sealer is also widely used in the woodworking industry to protect debarked logs, wood turning blanks, log "cookies," and live edge slabs.

Size
Color

GREAT FOR USE ON

GREAT FOR USE ON

  • Hardwood logs and lumber
  • Softwood timbers and lumber
  • Debarked logs
  • Log exports
  • Woodturning blanks
  • Log "cookies"

FEATURES

  • Prevents up to 90% of drying splits
  • Reduces blue stain and sapstain in logs
  • Improves yield with less waste
  • Water based
  • Non-hazardous
  • No solvents
  • Soap and water cleanup
View full details

APPLICATIONS

Surface Preparation

  • All areas to be coated should be clear of dirt and debris

Application

  • Apply ANCHORSEAL using a brush, roller or sprayer until it begins to drip slightly
  • For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
  • If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
  • Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period

Cleanup & Storage

  • Clean application equipment using hot soapy water
  • Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage

RESOURCES

Technical Data Sheet

Safety Data Sheet