1 3

BATES® HTR-4

BATES® HTR-4

Shipping calculated at checkout.

BATES® HTR-4 is a water-based resin emulsion that dries to a semi-firm, heat-resistant coating that can be used to repel glue in hot gluing applications up to 350°F/176.7°C. It provides temporary, effective protection from unwanted build-up of highly active compounds such as adhesives, resins, and fiberglass. Available in 5 or 55 gallon sizes. 

Request for Quote

GREAT FOR USE ON

  • Applicator wheels & rolls
  • Clamps & clamp carriers
  • Hot gluing equipment
  • Glue pans
  • Heat press platens
  • Joiners
  • Planer tables
  • Radio frequency glue systems
  • Saw tables
  • Set-up tables
  • Slat conveyors
  • Spreaders

FEATURES

  • Prevents glues, adhesives and resins from adhering to machinery
  • Formulated to work with high temperature and high performance adhesives
  • Dries to a thick, wax-like film
  • Allows for dried glue mess to be easily scraped off
  • Reduces machinery down-time for cleaning
  • Regular application prevents need for harsh cleaning methods
  • Silicone-free
  • Non-toxic
  • Non-hazardous
  • No solvents

DATA SHEETS

Bates HTR-4 SDS

View full details

APPLICATIONS

Surface Preparation

  • Surfaces must be clean and free of contamination. BATES® HTR-4 is not a glue remover and will only work when applied to clean equipment.
  • Before initial application, clean equipment to remove any oily residue that would prevent HTR-4 from adhering to the surface.
  • Any glue equipment surface, or equipment exposed to glue drippings, can be protected by HTR-4.

Application

  • High Frequency Gluers and Hot Presses

Removal and Reapplication

  • Accumulated compounds can be easily scraped off equipment using a straight-edged scraping tool.
  • In high volume operations, HTR-4 should be reapplied once per day or at the end of each shift.
  • In low volume operations, HTR-4 should be reapplied once per week.
  • Cleaning solvents are not needed for the removal of accumulated glue if proper application and removal procedures are followed.

Cleanup & Storage

  • Application equipment can be cleaned using hot soapy water.
  • Securely cover container of HTR-4 to prevent evaporation and deterioration. Stirring may be necessary after long periods of storage.
  • Store HTR-4 in a climate controlled area to prevent freezing. It should be stored at temperatures between 50°F/10°C and 90°F/32.2°C. If HTR-4 freezes, store at room temperature until thawed and stir contents thoroughly before using. DO NOT heat the container of BATES.

PRODUCT DETAILS

BATES HTR-4 cures to a waxy, slippery film. DO NOT use on floors or walkways.

RESOURCES

Bates HTR-4 TDS