1 28

MARINE GRADE Premium Semi-Transparent Wood Stain

MARINE GRADE Premium Semi-Transparent Wood Stain

$19.98
$19.98
Sale Sold out
Shipping calculated at checkout.

Protect your waterfront investment with the ultimate defense against moisture and decay. MARINE GRADE is a premium semi transparent wood stain designed specifically to waterproof and beautify docks, piers, and decks in high-moisture locations. Unlike solid paints that trap moisture and peel, this formula uses advanced nanotechnology to penetrate deep below the surface, coating wood fibers at the cellular level.

This deep-penetrating action creates a flexible, breathable barrier that stabilizes the wood, preventing the warping, cupping, and rotting common in marine environments. Available in a rich color palette, this semi transparent wood stain adds a layer of UV protection while highlighting the natural grain of the timber. Best of all, the water-based, ultra-low VOC formula is non-toxic and non-hazardous to aquatic life, making it the responsible choice for use over open water.

Please Note: All surfaces should be cleaned before sealing for the best penetration and performance. Remove all old coatings, dust, debris and loose material. For best results, eliminate oil, grease, algae, grime, mill glaze, mold, and mildew stains with SEAL-ONCE Multi-Surface Cleaner to create a flawless foundation for the semi-transparent wood stain to perform at its best.

GREAT FOR USE ON: Built for wood structures near open water, non-hazardous to aquatic life

  • Waterfront Structures: Boat docks, piers, bulkheads, and retaining walls.
  • Outdoor Living: Pool decks and boardwalks subject to heavy splashing.
  • Furniture: Adirondack chairs and benches exposed to salt spray.
  • Sensitive Areas: Projects where you need a finish safe for pets, plants, and marine life.

Features: 

  • The eco-friendly formula is non-hazardous to marine life. It is safe to apply over open water.
  • By locking moisture out of the wood cells, it keeps boards flat and stable.
  • The breathable barrier lets water vapor escape. Old-school sealers trap moisture and bubble up; this doesn't.
  • Tinted semi-transparent colors block UV rays to stop wood from turning gray and splintering.
  • You apply the second coat while the first is still damp. This "wet-on-wet" method saves hours of labor.
Size
Color

GREAT FOR USE ON

  • Formulated for use on wood near open water, non-hazardous to aquatic life

  • Recommended for wood boat docks, pool decks, walkways

  • Piers & outdoor furniture near ocean, lakes, ponds & rivers

FEATURES

•Water-based, eco-friendly, ultra low VOC, & safe for aquatic life

•Flexible & breathable barrier that expands & contracts with the elements

•Protects against warping & cupping

•2 coat wet on damp application at the speed of 1 coat

DATA SHEETS

View full details

APPLICATIONS

• Do not use if the air or surface temperature is below 50°F/10°C or above 95°F/35°C.
• Do not apply in rain or when rain is expected within 24-48 hours.
• DO NOT THIN. Mix well. Stir contents or shake thoroughly prior to use.
• Test a small area to ensure acceptable appearance and penetration.
• Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results.
• The second coat can be applied once the first coat is damp. The second coat should be applied within 20-30 minutes after applying the first coat. Heat and
humidity can decrease the time between coats. Non-Hazardous to aquatic life (GHS) when applied according to application instructions.
• For best results, apply in the shade and out of direct sunlight. When applying in direct sunlight and wood surface is hot, spray with a mist of water and apply SEAL-ONCE® Marine Grade Semi-Transparent Stain immediately on dampened surface.
• Apply to all surfaces.
• Do not use with other waterproofing products.
• Allow 3-4 hours for the surface to dry completely before permitting light foot traffic.

PRODUCT DETAILS

SEAL-ONCE® has been leading the innovation in the use of nanotechnology to create long-lasting, Eco-friendly wood sealers & tinted wood stains since 2005.   MARINE GRADE wood sealer and dock stain is specifically formulated to provide the highest level of protection for wood structures, situated near open water.  Wood used on boat docks, decks, and retaining walls near rivers, lakes, ponds or the ocean is subjected to near constant moisture.  MARINE provides the highest level of protection in those environments.  It is a great investment to extend the useful life of wood subjected to these harsh marine conditions, is non-hazardous to aquatic life.

SEAL-ONCE® MARINE Premium Waterproofing Wood Sealer & Stain is designed to protect & stabilize marine wood against water damage, salt water spray & decay.  Unlike many top-coat sealers on the market today, it penetrates wood below the surface, coating the wood fibers at the cellular level, which creates a long-lasting, flexible, breathable barrier.  It provides long-lasting protection from the inside out.

Clear formula allows wood to age naturally without decay, morphing to a rich silver-gray over time. Seal-Once Marine, when tinted as a wood stain, gives added protection from decay. Prevents long-standing water accumulation for up to 10 years on vertical & up to 6 years on horizontal surfaces.