ANCHORSEAL® 2 Premium Industrial Solution
ANCHORSEAL® 2 Premium Industrial Solution
ANCHORSEAL® 2 End Sealer Industrial Solution is a hybrid wax emulsion sealer designed to prevent up to 90% of end checking (drying splits) in freshly sawn logs, lumber, ipe decking, turning blanks and other green wood components. Our industrial solution works just as well as our consumer line, but is available in much larger quantities.
- Non-toxic, water based formula
- Use on the end cuts of hardwood or softwood
- Prevents up to 90% of end checking
- Uses natural plant-based polymers and wax to protect against drying splits
Request for Quote
ANCHORSEAL® 2 Premium Industrial Solution
Thank you for your message. We will get back to you soon!
GREAT FOR USE ON
GREAT FOR USE ON
GREAT FOR USE ON
- Hardwood logs and lumber
- Softwood timbers and lumber
- Debarked logs
- Log exports
- Woodturning blanks
- Log "cookies"
Collapsible content
APPLICATIONS
Surface Preparation
- All areas to be coated should be clear of dirt and debris
Application
- Apply ANCHORSEAL using a brush, roller or sprayer until it begins to drip slightly
- For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
- If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
- Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
Cleanup & Storage
- Clean application equipment using hot soapy water
- Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage