1 13

CLEAR WATERPROOFER Exterior Wood

CLEAR WATERPROOFER Exterior Wood

$12.98
$12.98
Sale Sold out
Shipping calculated at checkout.

CLEAR WATERPROOFER is the ultimate waterproofer for exterior wood & concrete, designed to preserve and protect wood surfaces while allowing them to age and gray naturally without decay. Effective on thermally modified wood and tropical hardwoods, this advanced formula uses nano-technology to deliver a water-based, eco-friendly solution that deeply penetrates the wood, forming a long-lasting, invisible barrier against water damage, mildew, and other environmental stressors. Ideal for decks, fences, and outdoor furniture, this waterproofer for exterior wood & concrete ensures your wood stays beautiful and resilient in all weather conditions.

Size

GREAT FOR USE ON

  • All exterior wood surfaces and hardwoods
  • Decks
  • Fences
  • Siding
  • Outdoor furniture
  • Pergolas
  • Playsets

FEATURES

  • Clear, Natural Finish: Provides a transparent finish that maintains the natural beauty of the wood without altering its appearance.
  • Exceptional Water Protection: Forms a waterproof shield that prevents water penetration, reducing the risk of warping, swelling, and rotting.
  • Aging Protection: Allows the wood to gray naturally.
  • Mildew Resistant: Inhibits the growth of mildew, and algae, ensuring your wood surfaces stay clean and beautiful.
  • Eco-Friendly Formula: Non-toxic, low VOC, and safe for the environment, pets, and people.
  • Easy Application: Can be applied with a brush, roller, or sprayer for convenience and efficiency. When spraying or rolling, always back brush
    for best results .

DATA SHEETS

Safety Data Sheet

Technical Data Sheet

View full details

APPLICATIONS

  • Do not use if the air or surface temperature is below
    45°F/7.22°C or above 95°F/35°C.
  • Do not apply in rain or when rain is expected within
    12-24 hours.
  • DO NOT THIN. Mix well. Stir contents or shake thoroughly prior to use.
  • Test a small area to ensure acceptable appearance
    and penetration.
  • Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer.
  • Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for the best results.
  • The second coat can be applied once the first coat
    is damp. Second coat should be applied within 20-30 minutes after applying the first coat. Heat and humidity can decrease the time between coats.
  • For best results, apply in the shade and out of
    direct sunlight.
  • When applying in direct sunlight and wood surface is hot, spray with a mist of water and apply SEAL-ONCE® Clear Waterproofer immediately on dampened surface.
  • Apply to all surfaces.
  • Do not use with other waterproofing products.

PRODUCT DETAILS

All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mildew stains with SEAL-ONCE® Multi-Surface Cleaner.
After cleaning, test absorbency of surface by sprinkling a few drops of water on the surface. If the water does not readily penetrate the surface, stripping will be necessary to remove old coatings prior to applying SEAL-ONCE® Clear Waterproofer.
Retest surface when dry.
Then apply SEAL-ONCE® All Wood Brightener to brighten and neutralize wood after cleaning. Follow instructions before applying SEAL-ONCE® Clear Waterproofer.