Stay Clean 5-Gallon Concentrate
Stay Clean 5-Gallon Concentrate
Got clean? Stay clean, for less per square foot. Stay Clean Concentrate is a water-based acrylic clear sealer that adheres to most porous surfaces and seals out water and weathering. The dried coating contains a preservative that protects it from discoloration caused by mildew and algae. Mix 1:1 with water; one 5-gallon pail makes 10 gallons and covers up to 4,000 sq. ft. Ideal for large roofs, long fence lines and full hardscapes.
For larger quantities, please view our bulk quantity listing!
*Contains a preservative to protect the dried coating from discoloration caused by mildew and algae.
Couldn't load pickup availability
GREAT FOR USE ON
GREAT FOR USE ON
roofs (shake, tile, composite), fencing, decking, furniture, concrete, pavers, stone and block
FEATURES
FEATURES
- Dried coating resists mildew, algae and discoloration from weathering effects.
- Adheres to most porous surfaces
- Cleans up with soap & water
- Apply with garden sprayer, air-assisted or airless sprayer
- Dry to the touch in one hour
- Dries clear
- Non-corrosive
- Ultra-low VOC’s & low odor
DATA SHEETS
DATA SHEETS
Collapsible content
APPLICATIONS
Coverage Area:
- Approximately 4,000 square feet per 5 gallons.
All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris, and loose material. Remove oil and grease, algae, grime, and mildew stains with appropriate cleaners. We recommend Seal-Once Multi-Surface Cleaner.
Application as follows:
- Apply only at temperatures above 45 degrees F and below 95 degrees F.
- Do not apply in rain or when rain is expected within 24 hours.
- Shake or stir well before using.
- Use a garden sprayer to apply.
- Apply enough Stay Clean until it starts to run (flood coat).
- Make sure all cracks and crevices are well coated.
- Surface may be used or walked on after 6-8 hours (depending on temperature and humidity).
PRODUCT DETAILS
All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime and mildew stains with appropriate cleaners. Recommend SEAL-ONCE® Multi-Purpose Cleaner.
