Skip to product information
1 of 6

Stay Clean Concentrate Bulk Quantities

Stay Clean Concentrate Bulk Quantities

Shipping calculated at checkout.

Stay Clean Concentrate is a water-based acrylic clear sealer built for contractors, property managers and roofing professionals. It adheres to most porous surfaces, seals out water and weathering, and dries clear in 1 hour. The dried film contains a preservative that protects it from discoloration caused by mildew and algae. Mix 1:1 with water. Available in 55-gallon drums and 275-gallon totes. Request a quote below!

*Contains a preservative to protect the dried coating from discoloration caused by mildew and algae.

Size
Request for Quote

GREAT FOR USE ON

roofs (shake, tile, composite), fencing, decking, furniture, concrete, pavers, stone and block

FEATURES

  • Dried coating resists mildew, algae and discoloration from weathering effects.
  • Adheres to most porous surfaces
  • Cleans up with soap & water
  • Apply with garden sprayer, air-assisted or airless sprayer
  • Dry to the touch in one hour
  • Dries clear
  • Non-corrosive
  • Ultra-low VOC’s & low odor

DATA SHEETS

View full details

Collapsible content

APPLICATIONS

Coverage Area:

  • Approximately 4,000 square feet per 5 gallons.

All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris, and loose material. Remove oil and grease, algae, grime, and mildew stains with appropriate cleaners. We recommend Seal-Once Multi-Surface Cleaner.

Application as follows:

  • Apply only at temperatures above 45 degrees F and below 95 degrees F.
  • Do not apply in rain or when rain is expected within 24 hours.
  • Shake or stir well before using.
  • Use a garden sprayer to apply.
  • Apply enough Stay Clean until it starts to run (flood coat).
  • Make sure all cracks and crevices are well coated.
  • Surface may be used or walked on after 6-8 hours (depending on temperature and humidity).

PRODUCT DETAILS

All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime and mildew stains with appropriate cleaners. Recommend SEAL-ONCE® Multi-Purpose Cleaner.