STAY CLEAN Ready-To-Use Formula
STAY CLEAN Ready-To-Use Formula
Got clean? Stay clean. You spent the weekend pressure washing. SEAL-ONCE® Stay Clean® is the step that makes it last. This ready-to-use clear sealer penetrates porous surfaces and bonds into a durable acrylic barrier that seals out the water and weathering that dull, stain and wear down roofs (shake, tile, composite), fencing, decking, furniture, concrete, pavers, stone and block, so they hold that freshly cleaned look longer.
Spray it on with a garden sprayer after you clean. It dries clear in 1 hour and you can walk on it in 6 to 8 hours. The water-based, ultra-low VOC formula is non-corrosive and made in the USA. The dried coating is mildew and algae resistant* while also being backed by our up-to-3-year performance guarantee.
Covers up to 800 sq. ft. (2 gallon) and up to 2,000 sq. ft. (5 gallon)
*Contains a preservative to protect the dried coating from discoloration caused by mildew and algae.
Couldn't load pickup availability
GREAT FOR USE ON
GREAT FOR USE ON
roofs (shake, tile, composite), fencing, decking, furniture, concrete, pavers, stone and block
FEATURES
FEATURES
- Dried coating resists mildew, algae and discoloration from weathering effects.
- Adheres to most porous surfaces
- Cleans up with soap & water
- Apply with garden sprayer, air-assisted or airless sprayer
- Dry to the touch in one hour
- Dries clear
- Non-corrosive
- Ultra-low VOC’s & low odor
DATA SHEETS
DATA SHEETS
Collapsible content
APPLICATIONS
All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris, and loose material. Remove oil and grease, algae, grime, and mildew stains with appropriate cleaners. We recommend Seal-Once Multi-Surface Cleaner.
Application as follows:
- Apply only at temperatures above 45 degrees F and below 95 degrees F.
- Do not apply in rain or when rain is expected within 24 hours.
- Shake or stir well before using.
- Use a garden sprayer to apply.
- Apply enough Stay Clean until it starts to run (flood coat).
- Make sure all cracks and crevices are well coated.
- Surface may be used or walked on after 6-8 hours (depending on temperature and humidity).
PRODUCT DETAILS
All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime and mildew stains with appropriate cleaners. Recommend SEAL-ONCE® Multi-Purpose Cleaner.
